Wired or wireless DDC

 

  • BALN-RUIO-24P

 

SPECIFICATION

 

The BALN-RUIO-24P is a wired and wireless 8Port remote I/O controller designed to manage devices over Ethernet.

The communication protocol is Modbus TCP/RTU, which can be used as a TCP through the protocol module, or as an RTU by setting the "Module Converter" function to "No".

  • Digital Input: Dry Contact and Wet Contact Support

  • Digital Output: 5A 250Vac and 5A 30Vdc controllable

  • Analog Input: It can be changed according to the conditions of the site when it is shipped

    (Example: From 1 to 4, 0 to 5V input is supported)
    5 to 8 supports 4 to 20 ms of current input)

  • Accuracy: 10 bits

  • Ethernet, RS485 and WiFi communication support

 
 

Various functions of RUIO

  • It supports Passive Switch Value (Dry Contact) and Active Level (Wet Contact). The acceptable range of Active Level is as follows.:

 
 

  • 8 Channel Digital Output.
    RUIO-24P is basically set to be 0-5V for 1-4 channels and 4-20mA for 5-8 channels. If you need to change, you can change the module to the channels below.:
    1) Current signal input: 4~20mA
    2) Voltage signal input: 0~5V
    3) Voltage signal input: 0~10V
    4) Resistance value 0-10k or other resistance type temperature and humidity sensors...

  • Each DO and DI point is attached with LEDs indicating whether it is used or not, making it easier to know whether it is operating or not.

  • Demo remote IO control over RS485 or TCP/IP can be executed. Through demonstrations, remote operation of IO and AI data collection can be collected.

  • A perfect rs modbus and 485 tcp control, you can explain.Developed more convenient features, or engineers.

  • This device has a built-in window virtual port & device management tool. You can find points and modify parameters with just one button.

  • Demo remote IO control over RS485 or TCP/IP can be executed. Through demonstrations, remote operation of IO and AI data collection can be collected.

 
 
 

  • CDM-UIO-14P

 

  • Direct digital controller (DDC) that supports building management through automatic control of HVAC facilities.

  • Customized configurations can be made according to the size of the control target.

  • Multifunctional industrial controller capable of wired and wireless transmission by connecting Digital/Analog input, output, and LoRa network.

  • IR transmission/reception control (energy management)

  • INPUT : ① Temperature : NTC 10kΩ ② Humidity : 0-100% ③ Current Sensor, AD Value

  • OUTPUT : ① Dry Contact switch ②Voltage : 0-10V DC
    ③ Current : 4-20mA

ADVANTAGE

  • Communication is smooth with repeater intestines. (noise blocking)

  • 24V AC/ 24V DC power combined type (convenient power supply)

  • It has a separate 24/5V DC output, so it can be used in various ways

  • STAND-ALONE function built-in

  • The temperature sensor port is built in separately

  • On-site Input/Output Point test is possible

SPECIFICATION